华美PAP板安装前

Before installation of Huamei PAP board

PAP板安装，宜采用抽芯铝铆钉，中间垫橡胶垫圈。安装特别部位的金属饰面时，裁板尺寸及方向应准确，边角整齐光滑。抽芯铝铆钉间距控制在mm为宜。抽芯铝铆钉间距控制在mm为宜。安装特别部位的金属饰面时，裁板尺寸及方向应准确。

For installation of PAP plate, aluminum rivets with core pulling and rubber washers in the middle should be used. When installing metal finishes at special parts, the size and direction of the cutting plate shall be accurate, and the edges and corners shall be neat and smooth. The spacing of aluminum rivets should be controlled within mm. The spacing of aluminum rivets should be controlled within mm. When installing metal finishes at special parts, the size and direction of the cutting plate shall be accurate.

PAP板安装时应选用适合的材质，不可以采用过于紧密的钢板。PAP板安装时，应选择适当尺寸、厚度适中、易于清洁和性能稳定等特性好的材质。PAP板安装后要进行定位、调整。在定位时要考虑到金属表层的光滑性。

Suitable materials shall be selected for installation of PAP plates, and too tight steel plates shall not be used. During the installation of PAP board, materials with proper size, moderate thickness, easy cleaning and stable performance shall be selected. The PAP Board shall be positioned and adjusted after installation. The smoothness of the metal surface shall be considered during positioning.

华美PAP板安装中

Huamei PAP board is being installed

PAP板安装时，要求铝箔与金属饰面间距不小于2mm，铝箔与金属饰面间距不小于5mm。PAP板安装后，应在金属表层加盖一层防尘网或不怕水布。如有损坏应及时修理。PAP板的外观尺寸和厚度宜选择适当。钢制品的尺寸和厚度宜选用正确。

When installing PAP board, the distance between aluminum foil and metal finish shall not be less than 2mm, and the distance between aluminum foil and metal finish shall not be less than 5mm. After the installation of PAP board, a dust net or waterproof cloth shall be covered on the metal surface. In case of any damage, it shall be repaired in time. The external dimension and thickness of PAP board should be selected appropriately. The size and thickness of steel products should be selected correctly.

PAP板安装，宜采用中间垫橡胶垫圈，边角整齐光滑。PAP板安装，宜采用抽芯铝铆钉。中间垫橡胶垫圈。抽芯铝铆钉的焊接方式应与其它钢材一致。焊接方法将钢材焊接好后放在平台上。在此处不能留缝隙。如果有缝隙可以用手指轻敲。用手指轻敲，如果没有缝隙则可以用手指按住。

For installation of PAP plate, rubber gasket should be used in the middle with neat and smooth edges and corners. Pop rivets should be used for installation of PAP plates. Rubber gasket in the middle. The welding method of blind rivets shall be consistent with that of other steels. Welding method place the steel on the platform after welding. No gaps shall be left here. If there is a gap, you can tap it with your fingers. Tap with your finger. If there is no gap, press with your finger.

华美PAP板安装后

After installation of Huamei PAP board

PAP板安装后，可以拆卸下来，但将铝箔固定好并用胶粘。如果在安装铝箔时发现有凹陷的地方或是凹痕，应及时清理。如有凹凸不平的地方，则应及时清理。若发现凹凸不平的地方或是有明显裂缝且无不滑措施等情况下，应立即替换。

After the PAP board is installed, it can be removed, but the aluminum foil is fixed and glued. If any dent or dent is found during the installation of aluminum foil, it shall be cleaned in time. If there is any uneven place, it shall be cleaned in time. In case of unevenness or obvious cracks without anti sliding measures, it shall be replaced immediately.

华美橡塑济南总代理提醒一件事，PAP板搬运时的安装方法。一般在搬运前应进行简单清洁，将PAP铝塑片放入砂锅内加热，待其熔化后即可拆卸。在搬运前应将PAP铝塑片固定好并用铁丝绑住。铝塑件预制板的安装方法。起先将PAP铝塑片放入砂锅内加热，待其熔化后即可拆卸。在搬运时应注意不要将铝塑件与钢板混合使用。

Huamei Rubber & plastic Jinan General Agent reminds me of one thing, the installation method of PAP board handling. Generally, the PAP aluminum-plastic sheet shall be cleaned simply before handling. The PAP aluminum-plastic sheet shall be heated in a casserole and removed after melting. The PAP aluminum-plastic sheet shall be fixed and bound with iron wire before handling. Installation method of aluminum-plastic prefabricated slab. At first, put the PAP aluminum-plastic sheet into a casserole for heating, and then remove it after melting. Care shall be taken not to mix aluminum-plastic parts with steel plates during handling.

以上就是今天所要讲解的内容了，相信大家在看完本文的描述之后，能够对该产品有一定的认识和了解，希望以上内容能帮助到你。另外，若你想要了解更多相关资讯，可以多多关注我们的网站动态www.hmbwcl.cn。

The above is the content to be explained today. I believe that after reading the description of this article, you can have a certain understanding of the product. I hope the above content can help you. In addition, if you want to learn more about our website, you can pay more attention to our website at www.hmbwcl cn。